rubber recycling EPT rubber processing products
Waste tire recycling EPT is to crush waste tires into rubber powEPTin various dimensions. The ultimate rubber powEPTis with purity of ninety nine.ninety nine%, can be utilized to make rubber tiles, rubber mat, asphalt, water-proof materials, filler of artificial grass.
The working procedure of squander tire recycling crumb rubber EPT is:
squander tire—tire circle cutter—tire strip cutter—tire slice cutter—rims separator—rubber crusher—magnetic separator—fiber separator—rubber powder
Specification of squander tire recycling EPTs:
1. Tire circle cutter is used to lower and open up the joint of tire’s facet and prime.
|
Identify |
Motor EPT |
Fat |
Capacity |
Tire specification |
|
Tire circle cutter |
4kw |
650kg |
40pcs/h |
650-1200mm (Each strengthened and nylon tires) |
2. Rims separator is utilised to independent the metal rims about the tire to avoid the harm to the EPT.
|
Title |
Motor EPT |
Fat |
Capacity |
|
Rims separator |
seven.5kw |
1300kg |
100pcs/h |
three. Tire strip cutter is used to minimize the tire cirlce into strips 5×8 cm .
|
Title |
Motor EPT |
Fat |
Capability |
Chopping dimension |
|
Tire strip cutter |
4kw |
850kg |
2.5t/h |
5x8cm |
4. Tire slice cutter is utilised to lower the strips into small chunks about three.five cubic centimeter.
|
Title |
Motor EPT |
Excess weight |
Ability |
Slicing measurement |
|
Tire slice cutter |
4kw |
800kg |
.8t/h |
3x5x8cm |
five. Rubber crusher is to crush the rubber blocks into powEPTin distinct sizes with purity of ninety nine.99%.
| Design | Ability | Drum diameter | Drum length | Front roll linear | Roll velocity ratio | Max roller spacing | Motor EPT |
| XKP-350 | 3ton | 300mm | 500mm | 26.2m/min | 1:two.5 | 8mm | 30kw |
| XKP-four hundred | 6ton | 400mm | 600mm | 34.5m/min | 1:2.five | 8mm | 45kw |
| XKP-450 | 8ton | 450mm | 760mm | 38.0m/min | 1:2.5 | 8mm | 55kw/75kw |
| XKP-560 | 10ton | 560mm | 800mm | 38.6m/min | one:2.five | 8mm | 75kw/90kw |
| XKP-560D | 20ton | 560mm | 1000mm | forty two.5m/min | 1:2.five | 8mm | 132kw/160kw |
Rewards of our rubber crusher EPT:
1. Crusher roller speed ratio: Ours is 1: 2.five, while the aged variety roller pace ratio is 1: 1.38.
2. Roller structure: Our two rollers are both grooved, which boost the friction and then increase the output, although the aged variety is 1 with groove, and the other is easy.
three. Roller materials: The roller is produced by Welding dress in resistant alloy components, 5Cr6MnMo. We can supply you 3 a long time guarantee of the roller. Even though the outdated varieties EPT use solid iron to make the rollers, quite effortless to break or crack in two .
four. EPT attribute: Our EPT is strength saving one/three. For illustration, making 1T powder, our EPT electricity intake is only 150 deg, although their electricity use is about 250- 280 deg in generating 1T powder.
5. Bearing: Our EPT use rolling bearing, there are eight items bearing within, even though the previous EPT use the slide bearings ( bush) , which is not as very good as ours.
