astMaterial
Surface layer colon BOPP
Glue layer colon EVA adhesive
astSpecification
Gloss
| SPECIFICATION | 18mic | 21mic | 24mic | 24mic | 27mic | 30mic | |||
| GLOSS | GLOSS | GLOSS | GLOSS | GLOSS | GLOSS | ||||
| THICKNESS lparmic rpar | Foundation | twelve | 12 | 12 | 15 | fifteen | eighteen | ||
| ADHESIVE | 6 | 9 | twelve | nine | 12 | 12 | |||
| Complete | eighteen | 21 | 24 | 24 | 27 | 30 | |||
| WEIGEPT | m2 solkg | 60 period4 | fifty one period6 | 45 period045 | forty five period45 | 40 period11 | 36 period15 | ||
| kg solm2 | period01656 | period01938 | period5712 | period571 | period57193 | period57166 | |||
| WIDTH lparmm rpar | 300mm-1800mm | ||||||||
| Length lparm rpar | 200m-3000m | ||||||||
| PARER Core | 25mm lpar1inch rpar comma58mm lpar2 period25inches rpar comma76mm lpar3inches rpar | ||||||||
| BONDING | Significantly less THAN 2 | ||||||||
Matt
| SPECIFICATION | 24mic | 27mic | 30mic | |||
| MATT | MATT | MATT | ||||
| THICKNESS lparmic rpar | Foundation | 15 | fifteen | 18 | ||
| ADHESIVE | 9 | 12 | twelve | |||
| Total | 24 | 27 | 30 | |||
| WEIGEPT | m2 solkg | forty six period3 | 41 | 37 | ||
| kg solm2 | period5716 | period5714 | period5711 | |||
| WIDTH lparmm rpar | 300mm-1800mm | |||||
| Length lparm rpar | 200m-3000m | |||||
| PARER Core | 25mm lpar1inch rpar comma58mm lpar2 period25inches rpar comma76mm lpar3inches rpar | |||||
| BONDING | Much less THAN two | |||||
astprocess parameter colon
| typical | EPT | |
| Temperature | eighty five ~ 100 ordmC | one hundred ~ one hundred ten ordmC |
| Roll Strain | eight ~ 15Mpa | 16 ~ twenty five Mpa |
| Velocity | five ~ thirty M solmin | 5 ~ten M solmin |
| Lamination Tools | dry and wet laminator | |
| Remarks | Specific laminations refer to people with thick ink comma dark colour comma a lot dampness and big measurement paper | |
astDirections for using BOPP thermal laminating movie colon
Standard procedure temperature is 90c-105c comma roller stress and temperature differ with distinct sorts of paper comma ink and EPTs period
When utilizing the film for the very first time or do other remedy comma try a little volume before mass laminating period of time
Make positive the ink is dry before laminating interval It will delaminate when the paper contains as well considerably dampness and powder period of time
Make sure set the materials in a reduced-temperature comma dry spot period of time
astEPT colon
StXiHu (West Lake) Dis.Hu (West Lake) Dis.rd export bundle with carton pluspallet time period
